- Two-finger parallel jaw, 90 mm stroke An 80 mm jaw travels the full 90 mm stroke in as little as 0.24 s.
- Gripping force set in software from 5 N to 120 N Force and speed are both adjustable, so one gripper handles a thin-walled container and a steel block.
- No camera in this edition The Standard configuration omits the 1080p RGB camera the Advanced edition carries, for teams whose vision comes from elsewhere on the robot.
- 20 kg form-fitting load Horizontal form-fitting grasps are rated to 20 kg and friction grasps to 5 kg vertically on a square steel block.
- 0.1 mm fingertip resolution at 1000 Hz High-speed RS-485 at 6 Mbps carries angle, angular velocity, torque and temperature feedback at a 1000 Hz control frequency.
- Fits the Unitree humanoid range It is made for the G1, H1, H2 and R1, and for standalone operation, and we confirm fitment against your configuration before order.
Description
The Dex1-1 is the two-finger parallel gripper Unitree offers as the simplest end effector for its humanoid arms. It is a jaw, not a hand: one actuator, an 80 mm jaw and 90 mm of travel, aimed at pick-and-place work where a five-finger hand would be over-specified.
The mechanism is capable for its size. Gripping force is set in software anywhere between 5 N and 120 N, speed between 50 mm/s and 375 mm/s, and fingertip position resolves to 0.1 mm. A form-fitting horizontal grasp is rated to 20 kg, a friction grasp to 5 kg vertically on a square steel block, and the full stroke closes in as little as 0.24 s.
The Standard edition is the one distinction that matters when choosing between the three Dex1-1 configurations: it carries no camera. The Advanced edition adds a 1080p RGB camera on the same mechanism, and the Ultimate edition sits above it. If vision on your robot comes from the head or from an external rig, the Standard edition is the configuration to order.
Control is over high-speed RS-485 at a 6 Mbps baud rate and a 1000 Hz control frequency, with angle, angular velocity, torque and temperature fed back and angle, velocity, torque, stiffness and damping accepted as commands. The gripper is made for the G1, H1, H2 and R1 humanoids and for standalone use; fitment against your own arm configuration is confirmed before order.
Key Capabilities
- Two-finger parallel jaw, 90 mm stroke: An 80 mm jaw travels the full 90 mm stroke in as little as 0.24 s.
- Gripping force set in software from 5 N to 120 N: Force and speed are both adjustable, so one gripper handles a thin-walled container and a steel block.
- No camera in this edition: The Standard configuration omits the 1080p RGB camera the Advanced edition carries, for teams whose vision comes from elsewhere on the robot.
- 20 kg form-fitting load: Horizontal form-fitting grasps are rated to 20 kg and friction grasps to 5 kg vertically on a square steel block.
- 0.1 mm fingertip resolution at 1000 Hz: High-speed RS-485 at 6 Mbps carries angle, angular velocity, torque and temperature feedback at a 1000 Hz control frequency.
- Fits the Unitree humanoid range: It is made for the G1, H1, H2 and R1, and for standalone operation, and we confirm fitment against your configuration before order.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex1-1, Standard Edition |
| Product Type | Two-finger parallel gripper (end effector) |
| Compatibility | Unitree G1, H1, H2 and R1 humanoids, or standalone |
| Dimensions | 143 x 78 x 67 mm |
| Width | 78 mm half-open, 120 mm fully open, 124.5 mm fully closed with side rails extended |
| Weight | 550 g |
| Stroke | 90 mm |
| Jaw Length | 80 mm |
| Gripping Force | 5–120 N, adjustable |
| Speed | 50–375 mm/s, adjustable |
| Fingertip Position Resolution | 0.1 mm |
| Full-Stroke Closing Time | 0.24 s, shortest |
| Grasp Load, Form-Fitting | 20 kg maximum horizontal |
| Grasp Load, Friction | 5 kg maximum vertical, square steel block |
| Operating Voltage | 24–64 V, 24/48 VDC recommended |
| Operating Temperature | -20 °C to 60 °C |
| Communication Interface | High-speed RS-485, 6 Mbps baud rate |
| Control Frequency | 1000 Hz |
| Motor Peak Torque | 5 N·m |
| Motor Maximum Speed | 27 rad/s at 64 V |
| Reduction Ratio | 1:25 |
| Encoder | 15-bit absolute |
| Peak Line Current | 3.5 A |
| Static Current | 0.03 A |
| Camera | None in this edition |
| Package Contents | Confirm at quote |
Industries
Frequently Asked Questions
A two-finger parallel gripper for Unitree humanoid arms. One actuator drives an 80 mm jaw through a 90 mm stroke, with force and speed set in software.
No. The Standard configuration is the gripper without a camera; the Advanced edition adds a 1080p RGB camera to the same mechanism.
Unitree rates a form-fitting horizontal grasp to 20 kg and a friction grasp to 5 kg vertically, measured with a square steel block.
The G1, H1, H2 and R1 humanoids, and standalone use. Tell us your arm configuration and we will confirm fitment before you order.
Over high-speed RS-485 at a 6 Mbps baud rate and a 1000 Hz control frequency. Angle, angular velocity, torque and stiffness are commandable, and the joint reports angle, velocity, torque and temperature.
The Unitree Dex1-1 Gripper Standard Edition is priced at 129.500 Ft in your market.
Recently Viewed
You haven't viewed any products yet.
