{"product_id":"ti5-cra-ri70-80-lightweight-joint-module","title":"Ti5 CRA-RI70-80 Lightweight Joint Module","description":"\u003cp\u003eThe CRA-RI70-80 lifts the Ti5 line past 100 N·m: 69 N·m peak torque at the 51 ratio, 91 N·m at 81, 102 N·m at 101 and 108 N·m at 121, from a 0.9 kg base build. That is roughly 1.6 times the 60-frame's peak torque for about 0.17 kg more mass, which makes it the usual choice for the load-bearing joints — shoulders, hips, knees — of a human-scale limb.\u003c\/p\u003e\u003cp\u003eIt is the lighter of the two 70-frame modules. The CRA-RI70-80 and the CRA-RI70-90 share the same four ratios, the same torque and speed table, the same 500 W platform at 24–48 V with 6.1 A rated and 8.4 A maximum continuous current, the same 0.118 N·m\/A torque constant and the same 18 mm bore. Mass is the separation: 0.9 kg here against 1.27 kg, 1.11 kg against 1.5 kg for the extended body, 0.99 kg against 1.3 kg for the EtherCAT build, with housings a half-millimetre shorter at each step. Their performance figures are identical, so picking between the two frames is a question of mounting envelope and moving mass, settled with the quotation.\u003c\/p\u003e\u003cp\u003eThree builds are fully specified. The base CRA-RI70-80-PRO-2-XXX is 73 mm at 0.9 kg with a 16-bit encoder on CAN and 596.4 g·cm² rotor inertia. The -B build extends the housing to 91.5 mm at 1.11 kg and 746.7 g·cm². The -2E-EC build stays at 73 mm, weighs 0.99 kg, and adds a 16\/18-bit encoder option with EtherCAT alongside CAN. A fourth designation, -B-2E-EC, completes the family, and its figures are confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eThe module is an integration part, not a finished machine: one housing holding motor, gear stage, encoder and drive electronics, with a bore for cabling and a fieldbus for control. The links it moves, the controller that commands it and the power system behind it are the integrator's work.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e69 to 108 N·m across four ratios:\u003c\/strong\u003e 51:1 gives 69 N·m peak at up to 77 RPM, 81:1 gives 91 N·m at 48 RPM, 101:1 gives 102 N·m at 40 RPM and 121:1 gives 108 N·m at 30 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe lighter of the two 70-frame modules:\u003c\/strong\u003e Base build mass is 0.9 kg against 1.27 kg for the CRA-RI70-90, on identical torque, speed and electrical ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 W electrical platform:\u003c\/strong\u003e All builds run from 24–48 V at 6.1 A rated and 8.4 A maximum continuous current, with a 0.118 N·m\/A torque constant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 arcsec backlash on the top two ratios:\u003c\/strong\u003e Gear backlash is 20 arcsec at 51:1 and 81:1 and tightens to 10 arcsec at 101:1 and 121:1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 mm hollow shaft:\u003c\/strong\u003e The bore matches the 60-frame modules, so cabling can run through a whole limb of mixed joint sizes on one routing scheme.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree fully specified builds:\u003c\/strong\u003e 73 mm at 0.9 kg for the base unit, 91.5 mm at 1.11 kg for the extended -B body, and 73 mm at 0.99 kg for the -2E-EC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEtherCAT on the -2E-EC build:\u003c\/strong\u003e That build keeps the 73 mm base length and adds a 16\/18-bit encoder option with EtherCAT alongside CAN.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"Ti5 Robotics","offers":[{"title":"Default Title","offer_id":67847207354658,"sku":"Ti5-Robotics-Joint-Module-70-80","price":0.0,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/0693\/1234\/files\/ti5-robotics-joint-module-70-80-1.png?v=1794972752","url":"https:\/\/robotixmarket.hu\/en\/products\/ti5-cra-ri70-80-lightweight-joint-module","provider":"Robotix Market Europe","version":"1.0","type":"link"}