- 800 N·m at the 161 ratio Peak torque runs from 497 N·m at 33 RPM to 800 N·m at 10 RPM, the highest in the Ti5 module line.
- 1,500 W and 30.2 A continuous Rated at 24–48 V with 14.1 A rated and 30.2 A maximum continuous current, and a 0.293 N·m/A torque constant.
- 40 mm hollow shaft The widest bore in the line, for the cable bundles that pass through a machine's proximal joints.
- Five gear ratios Ratios 51, 81, 101, 121 and 161 raise allowable torque at average load from 242 N·m to 557 N·m.
- 10 arcsec backlash from the 101 ratio Gear backlash is 20 arcsec at ratios 51 and 81 and 10 arcsec at 101, 121 and 161.
- Three fully specified builds 121.7 mm at 6.84 kg for the base unit, 147.7 mm at 7.52 kg for the -B body, and 124.5 mm at 6.87 kg for the -2E-EC.
- Fourth build confirmed at quote The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
Description
The CRA-RI110-170 is the top of the Ti5 joint module line: 497 N·m peak torque at the 51 ratio and 800 N·m at 161, through a 40 mm hollow shaft, on a 1,500 W platform. Nothing else in the family reaches those figures — the 100-frame modules stop at 459 N·m — and nothing else is as heavy, at 6.84 kg for the base build.
Five gear ratios are offered. Peak speed is low by design, falling from 33 RPM at ratio 51 to 10 RPM at 161 as torque climbs, with allowable torque at average load rising from 242 N·m to 557 N·m and backlash tightening from 20 arcsec to 10 arcsec at ratios 101 and above. The electrical side is 24–48 V with 14.1 A rated and 30.2 A maximum continuous current — the widest current headroom in the line — and a 0.293 N·m/A torque constant, the highest torque per amp of any module here.
Three builds are fully specified. The base unit is 121.7 mm long at 6.84 kg with a 16-bit encoder on CAN. The -B build extends the housing to 147.7 mm at 7.52 kg with higher rotor inertia and the same electrical ratings. The -2E-EC build stays near the base dimensions at 124.5 mm and 6.87 kg, adding EtherCAT alongside CAN with a 16/18-bit encoder option for deterministic motion networks. The -B-2E-EC designation completes the family, and its figures are confirmed with the quotation.
Several hundred newton-metres per joint is the domain of hips, knees and torso axes on humanoid platforms, base and shoulder joints on heavy collaborative arms, and articulated test rigs. Buyers should be comfortable sizing an actuator from ratio-dependent torque-speed data, and should treat the module as a component: links, controller, power distribution and software remain theirs to build.
Key Capabilities
- 800 N·m at the 161 ratio: Peak torque runs from 497 N·m at 33 RPM to 800 N·m at 10 RPM, the highest in the Ti5 module line.
- 1,500 W and 30.2 A continuous: Rated at 24–48 V with 14.1 A rated and 30.2 A maximum continuous current, and a 0.293 N·m/A torque constant.
- 40 mm hollow shaft: The widest bore in the line, for the cable bundles that pass through a machine's proximal joints.
- Five gear ratios: Ratios 51, 81, 101, 121 and 161 raise allowable torque at average load from 242 N·m to 557 N·m.
- 10 arcsec backlash from the 101 ratio: Gear backlash is 20 arcsec at ratios 51 and 81 and 10 arcsec at 101, 121 and 161.
- Three fully specified builds: 121.7 mm at 6.84 kg for the base unit, 147.7 mm at 7.52 kg for the -B body, and 124.5 mm at 6.87 kg for the -2E-EC.
- Fourth build confirmed at quote: The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI110-170-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Gear Ratios | 51, 81, 101, 121, 161 |
| Peak Torque | 497 / 641 / 702 / 762 / 800 N·m (ratios 51 / 81 / 101 / 121 / 161) |
| Max Allowable Torque at Average Load | 242 / 351 / 460 / 557 / 557 N·m |
| Rated Torque at 2000 RPM Input | 169 / 255 / 328 / 363 / 363 N·m |
| Peak Speed | 33 / 21 / 16 / 14 / 10 RPM |
| Rated Speed at Half Rated Torque | 22 / 15 / 12 / 10 / 7 RPM |
| Gear Backlash | 20 arcsec at ratios 51 and 81; 10 arcsec at 101, 121 and 161 |
| Rated Power | 1,500 W |
| Supply Voltage | 24–48 V |
| Rated Current | 14.1 A |
| Max Continuous Current | 30.2 A |
| Torque Constant | 0.293 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 40 mm |
| Length | 121.7 ±0.5 mm base; 147.7 ±0.5 mm -B; 124.5 ±0.5 mm -2E-EC |
| Mass | 6.84 kg base; 7.52 kg -B; 6.87 kg -2E-EC |
| Rotor Inertia | 8,333.3 g·cm² base; 10,709.2 g·cm² -B; 9,689.83 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
Five: 51, 81, 101, 121 and 161. Peak torque rises from 497 N·m to 800 N·m across them while peak speed falls from 33 RPM to 10 RPM.
It is a step up in every figure: 800 N·m peak against 459 N·m, 1,500 W against 1,000 W, a 40 mm bore against 32 mm and a 0.293 N·m/A torque constant against 0.175. It is also the heaviest module in the line at 6.84 kg for the base build.
A 24–48 V supply at 1,500 W rated power, with 14.1 A rated current and 30.2 A maximum continuous current.
The -2E-EC build, with CAN or EtherCAT and a 16/18-bit encoder option at 124.5 mm and 6.87 kg. The base and -B builds use CAN with a 16-bit encoder.
6.84 kg for the base build, 6.87 kg for the -2E-EC and 7.52 kg for the extended -B body at 147.7 mm. The -B-2E-EC mass is confirmed with the quotation.
It is offered by quotation. Version, gear ratio or configuration, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
