- RoamerX Pro configured at the factory Mapping, localisation, navigation, path planning and obstacle avoidance arrive working, so a team sets routes instead of building a navigation stack.
- Wheel-legged mobility Three joints plus a driven wheel on each leg, sixteen degrees of freedom in all, for fast rolling and legged obstacle negotiation on the same route.
- About 30 kg continuous load Enough for thermal cameras, gas detectors, inspection sensors or communications equipment on long rounds.
- IP67 and -20 to 55 °C An integrated sealed design for heavy rain, dust, cold nights and hot industrial sites.
- Hot-swap endurance Runtime is at least 5 hours unloaded and at least 3.5 hours fully loaded, with dual packs replaced without shutting the robot down.
- Fifteen standard interfaces Communication, power and control connections accept additional payloads and computing modules.
- Sensor package itemised in writing Which LiDAR, cameras and computing hardware ship with this edition, and the RoamerX Pro licence terms, are listed on the quotation.
Description
An industrial quadruped earns its keep on the routes nobody wants to walk: the 2 a.m. substation round, the fence line in the rain, the plant corridor checked every hour. Driving it there by remote saves a person the walk but still occupies an operator. This edition is the M1 platform with GENISOM's RoamerX Pro navigation configured at the factory, so the robot maps a site, localises itself and runs inspection and patrol routes without a driver.
The chassis is wheel-legged: three joints plus a driven wheel on each leg, sixteen degrees of freedom in all, so it rolls along roads and corridors and steps or climbs when the ground turns rough. Performance figures are an extreme speed of 8 m/s and a rated maximum of 6 m/s, continuous climbing of 25 cm steps, vertical obstacles up to 80 cm and slopes to a 45° limit, with stable passage on snow and ice.
It carries about 30 kg of continuous working load — room for thermal cameras, gas detectors, inspection sensors or communications gear — behind an integrated sealed design rated IP67, over an operating range of -20 to 55 °C. Dual hot-swappable 54 V packs give at least 5 hours unloaded and at least 3.5 hours fully loaded, and fifteen standard hardware interfaces for communication, power and control accept extra payloads and computing modules.
Two neighbours are worth distinguishing. The M1 Pro is the same platform aimed at voice interaction and person following, with UWB tracking, a microphone, a speaker and local storage instead of the navigation package; and the L1 EDU RoamerX Pro editions put the same software on the much smaller, lighter L1 research platform. Which LiDAR, cameras and computing hardware ship with this edition, and the RoamerX Pro licence and update terms, are itemised on the quotation.
Key Capabilities
- RoamerX Pro configured at the factory: Mapping, localisation, navigation, path planning and obstacle avoidance arrive working, so a team sets routes instead of building a navigation stack.
- Wheel-legged mobility: Three joints plus a driven wheel on each leg, sixteen degrees of freedom in all, for fast rolling and legged obstacle negotiation on the same route.
- About 30 kg continuous load: Enough for thermal cameras, gas detectors, inspection sensors or communications equipment on long rounds.
- IP67 and -20 to 55 °C: An integrated sealed design for heavy rain, dust, cold nights and hot industrial sites.
- Hot-swap endurance: Runtime is at least 5 hours unloaded and at least 3.5 hours fully loaded, with dual packs replaced without shutting the robot down.
- Fifteen standard interfaces: Communication, power and control connections accept additional payloads and computing modules.
- Sensor package itemised in writing: Which LiDAR, cameras and computing hardware ship with this edition, and the RoamerX Pro licence terms, are listed on the quotation.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | Genisom |
|---|---|
| Model | M1 RoamerX Pro |
| Robot type | Industrial wheel-legged quadruped |
| Software | RoamerX Pro, configured at the factory |
| Navigation functions | Mapping, localisation, navigation, path planning, obstacle avoidance |
| Degrees of freedom | 16 (3 joints + 1 driven wheel per leg) |
| Continuous working load | About 30 kg |
| Extreme speed | 8 m/s |
| Rated maximum speed | 6 m/s |
| Slope | Up to ±45° |
| Step climbing | 25 cm, continuous |
| Vertical obstacle | Up to 80 cm |
| Protection | IP67, integrated sealed design |
| Operating temperature | -20 to 55 °C |
| Battery | 18.7 Ah, 54 V, dual hot-swappable packs |
| Runtime | 5 h or more unloaded; 3.5 h or more fully loaded |
| Standing dimensions | 920 × 480 × 585 mm |
| Weight with battery | 41 kg |
| Expansion | 15 standard hardware interfaces for communication, power and control |
| Charging | Manual, or automatic with the optional M1 Charging Dock |
| LiDAR, cameras and computing of this edition | Confirm at quote |
| RoamerX Pro licence, updates, multi-floor and multi-site support | Confirm at quote |
| Final specifications | Confirmed with the order |
Industries
Frequently Asked Questions
Mapping, localisation, navigation, path planning and obstacle avoidance, configured at the factory, so the robot follows inspection and patrol routes on its own rather than being driven.
The M1 platform is rated for about 30 kg of continuous working load, which covers thermal cameras, gas detectors, inspection sensors or communications gear.
It reaches an extreme speed of 8 m/s, with a rated maximum of 6 m/s, with continuous 25 cm step climbing, vertical obstacles up to 80 cm and slopes to a 45° limit.
At least 5 hours unloaded and at least 3.5 hours fully loaded, on dual hot-swappable packs that are replaced without shutting the robot down.
The M1 Pro is the same platform aimed at voice interaction and person following, with UWB tracking, a microphone, a speaker and local storage rather than the navigation package. The L1 EDU RoamerX Pro editions put the same software on the much smaller, lighter L1 research platform.
The Genisom M1 RoamerX Pro Quadruped Robot is priced at 18.989.100 Ft in your market.
Recently Viewed
You haven't viewed any products yet.
